My Cart

Close

Electronics Grade Cartridges



Pleated Polyethersulfone (PES) Membrane for Final Filtration of Ultrapure Water

ZTEC E Microelectronics Grade Cartridges represent Graver's latest development in ultrapure water filtration technology. The Filters are inherently hydrophilic and contain no added surfactants or wetting agents that could contaminate pure and ultrapure water streams. The PES Membrane offers superior flow characteristics, high contaminant capacity and consistent removal of submicron particles. The Cartridges exhibit rapid rinse up to 18 Meg Ohm-cm resistivity and single digit ppb levels of TOC.

Request a quote

 Manufactured, flushed, tested and packated in an ISO Class 7 Cleanroom Environment
Filters are 100% Flushed with 18 Meg Ohm-cm DI Water and integrity tested
Resistivity rinse up to 18 Meg Ohm-cm and single digit ppb TOC levels with minimal throughput
 Available in a variety of end cap/adapter configurations to fit all industry standard housings
Pore Size, lot and Serial Number are stamped on each filter element for identification and traceability 
Complete Qualification Guide available 

Specifications:
Media -- Asymmetric Polyethersulfone Membrane
Inner Core, End Caps, Cage -- Polypropylene
Support Layers -- Spunbond Polypropylene
Gaskets/O-Rings -- Buna-N, EPDM, Silicone, Teflon Encapsulated Viton (O-Rings Only), and Viton
Micron Ratings -- 0.03, 0.1, 0.2, 0.45
Nominal Lengths -- 9.75" (24.8 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm)
Outside Diameter -- 2.7" (6.9" cm)
Inside Diameter -- 1.0" (2.54 cm)
Surface Area -- 7.6 ft² (0.63 m²) per 10" Element

Operating Parameters:
Maximum Sustained Operating Temperature -- 176°F at 20 PSID (80°C at 1.38 bar)
Maximum Differential Pressure -- 80 PSID @ 70°F (4.14 bar at 21°C) / 40 PSID at 160°F (2.8 bar at 71°C)
Maximum Reverse Differential Pressure -- 40 PSID at 70°F (2.8 bar at 21°C)
Recommended Changeout Pressure -- 35 PSID (2.4 bar)

Certifications:
ZTEC E Filters were tested by outside laboratory, CT Associates in November 2011 for the following:
TOC Rinse Up to 0.5 ppb
Resistivity Rinse up to 18 Meg Ohm-cm
Non-Volatile Residue
Particle Rinse Up
Trace Metal Extractables
Anion and Cation Extractables 

Please request Graver's ZTEC E Qualification Guide for details and complete test reports.

DI Water
 High Purity Chemicals

Below is all information pertaining to the ZTEC E Cartridge Filter:

ZTEC E Cartridge Filter

Cannot find the configuration you are looking for? We would be happy to issue you a formal quote with exactly what you need.


Learn about New Products, Discounts, and more!