My Cart

Close

Nylon 6,6 Membrane Cartridges



General Grade Nylon 6,6 Cartridges are designed for general purpose use wherever a cost-effective membrane filter is required. GGHNY Cartridges are available in both standard and Plus+ Grades. The Plus+ Grade Membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane's rating. The extended area option (GGHNYX) offers up to 40% more surface area. This additional area results in significant increases in flow rate and loading capacity in the same footprint. 

Request a quote

Construction
Membrane -- Nylon 6,6
Support Media -- Polypropylene 
Inner Core, End Caps, Cage -- Polypropylene 
Gaskets/O-Rings -- Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton
Micron Ratings -- 0.03, 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2
Nominal Lengths -- 10", 20", 30", 40"
Outside Diameter -- 2.7" (6.9" cm)

Operating Parameters
Maximum Operating Temperature -- 175°F
Maximum Differential Pressure -- 50 PSI (Forward), 40 PSI (Reverse)

Sanitization/Sterilization
 Filtered Hot Water -- 80°C for 30 Minutes
 Steam Sterilization -- 121°C for 30 Minutes, Multiple Cycles
Chemicals - Cartridges are chemically compatible with most chemicals and sanitizing agents
Note: Stainless Steel Insert option needed for all Cartridges being hot water Sanitized or steam sterilized. 

 Drinking Water
Wine
Soft Drinks
Pharmaceutical
Fermentation
Endotoxin Removal

Below is all information pertaining to the Nylon 6,6 Membrane Cartridge Filter:

Nylon 6,6 Cartridge Filter

Cannot find the configuration you are looking for? We would be happy to issue you a formal quote with exactly what you need.


Learn about New Products, Discounts, and more!